Loading... Please wait...

Our Newsletter

DEVEL 4 Frame Kit

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
Low Profile Kit:
Spare Arm:


The AVANT Devel 4  is a  lightweight 4" Stretched X Modular designed  to support standard sized camera with mounting width 27.5-28.5mm and micro sized camera with mounting width 18.5mm-19.5mm. This modular design features  4mm thick chamfered arms,  1.5mm chamfered top plate, 1.5mm camera mounting plate, 1.5mm chamfered bottom plate and mid plate . Each arm can be removed with only 2 screws for easy maintenance.  All the press nuts come  pre-installed for simple assembly and 2 different sets of camera mounting plates are included in the kit for different type of camera mounting.  Top plate cutout is large enough to tilt the angle up to 75 degs for standard sized camera.  Air frame + hardware weighs 43g.

       "Frame kit comes standared with 28mm standoffs and 2 different sets of camera plate for Micro and Standard sized Camera"

      "Optional 22mm and 25mm low profile kits are  also available for Micro sized camera only"


      "Free DHL upgrade will be offered when purchasing (Frame Kit + Motors) OR (any 2 Frame kits), please choose standard shipping USD5.00 when proceeding checkout"  


  • Weight (Airframe + Hardware): 43g (+/-2g)
  • Motor to Motor diagonally: 180mm
  • Arm Thickness: 4mm
  • Bottom and Mid Plate Thickness: 1.5mm
  • Top Plate Thickness: 1.5mm
  • Camera mounting plate thickness: 1.5mm
  • Max camera angle: 75 degrees (standard sized camera)
  • FC mounting pattern: 30.5x30.5mm (M3 holes) and 20mm x 20mm (M2.5mm holes)
  • ESCs: 20a-30a
  • Motor Size: 1407 (12mm x 12mm) 
  • Motor mounting pattern: 12mm x 12mm
  • Prop Size: 4"
  • Lipo: 4S 850mah - 1300mah



  • 4x    4mm 3K Twill Weave carbon fiber arm (Chamfered/cut in 45degs)
  • 1x    1.5mm 3K Twill Weave carbon fiber bottom plate (Chamfered)
  • 1x    1.5mm 3K Twill Weave carbon fiber mid plate (Chamfered)
  • 1x    1.5mm 3K twill Weave carbon fiber top plate (Chamfered)
  • 2x    1.5mm 3K carbon fiber camera mounting plate (Standard sized camera)
  • 2x    1.5mm 3K carbon fiber camera mounting plate (Runcam Micro Swift)
  • 4x    28mm aluminum textured grip standoffs
  • 6x    M3 high quality stainless steel press nuts (pre-installed on mid plate)
  • 6x    M3*5 high tensile steel screws
  • 6x    M3*9 high tensile steel screws
  • 2x    M3*12 high tensile steel screws 
  • 4x    M3*15 nylon screws
  • 4x    5mm hex nylon standoff
  • 8x    M3 nylon nuts
  • 1x    XT30 connectors
  • 1x    Avant battery strap (15mm x 190mm) "Blue Logo"

        "This frame kit is not applied for 40% off on the replacement parts"


Bookmark and Share

Find Similar Products by Category

Add to Wish List

Click the button below to add the DEVEL 4 Frame Kit to your wish list.

Related Products

You Recently Viewed...