Loading... Please wait...

Our Newsletter

DEVEL 5 Frame Kit "NEW"

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
Mid / Bottom Plate Thickness:
Low Profile Kit:
Spare Arm:


The AVANT Devel 5  is a  lightweight 5" Stretched X designed  to support standard sized camera with mounting width 27.5-28.5mm and micro sized camera with mounting width 18.5mm-19.5mm. This modular design features  4mm thick chamfered arms,  2mm chamfered top plate, 2mm camera mounting plate, 2.0mm chamfered bottom plate and mid plate .  Each arm can be removed with only 2 screws for easy maintenance or replacement.  All the press nuts come  pre-installed for simple assembly and a carbon fiber antenna mounting bracket is also included. 2 different sets of camera mounting plates for different type of camera mounting. Large top plate cutout is capable to tilt the camera angle up to 75 degs for standard sized camera.  Air frame + hardware weighs 63g.

       "This kit comes standard with  28mm standoff and 2 different sets of camera plate for both Micro and Standard sized Camera"

       "Optional 22mm and 25mm Low Profile kits are also available for Micro sized camera only"


     "New 2.5mm Bottom and 3mm Mid Plate (6g heavier than the 2mm version) have been added as an option"


      "Free DHL upgrade will be offered when purchasing (Frame Kit + Motors) OR (any 2 Frame kits), please choose standard shipping USD5.00 when proceeding checkout"  



  • Weight (Airframe + Hardware): 63g (+/-2g) and 69g with 2.5mm bottom/3mm mid plate
  • Motor to Motor diagonally: 212mm
  • Arm Thickness: 4mm
  • Bottom and Mid Plate Thickness: 2.0mm
  • Top Plate Thickness: 2.0mm
  • Camera mounting plate thickness: 2.0mm
  • Max camera angle: 75 degrees (Standard sized camera)
  • FC mounting pattern: 30.5 x 30.5mm (M3 mounting holes) and 20mm x 20mm (M2.5 mounting holes)
  • ESCs: 20a-35a
  • Motor Size: 22xx - 23xx
  • Motor mounting pattern: 16mm x 19mm
  • Prop Size: 5"
  • Lipo: 4S 1100mah - 1550mah



  • 4x    4mm 3K Twill Weave carbon fiber arm (Chamfered)
  • 1x    2.0mm 3K Twill Weave carbon fiber bottom plate (Chamfered)
  • 1x    2.0mm 3K Twill Weave carbon fiber mid plate (Chamfered)
  • 1x    2.0mm 3K twill Weave carbon fiber top plate (Chamfered)
  • 2x    2.0mm 3K carbon fiber camera mounting plate (Standard sized camera)
  • 2x    2.0mm 3K carbon fiber camera mounting plate (Runcam Micro Swift)
  • 4x    28mm aluminum textured grip standoffs
  • 6x    M3 high quality stainless steel press nuts (pre-installed on mid plate)
  • 6x    M3*6 high tensile steel screws
  • 6x    M3*10 high tensile steel screws
  • 2x    M3*12  high tensile steel screws 
  • 4x    M3*15 nylon screws
  • 4x    5mm hex nylon standoff
  • 8x    M3 nylon nuts
  • 1x    XT60 connectors
  • 1x    Avant battery strap (220mm long) "Blue Logo"

      "This frame kit is not applied for 40% off on the replacement parts"


Bookmark and Share

Find Similar Products by Category

Write your own product review

Product Reviews

  1. Absolutely Incredible

    Posted by Chris Dewey on 7th Feb 2018

    I have purchased many frames in the past with varying price ranges. Many of said frames were in excess of $90 USD. The Devel 5 is the most beautiful, well-thought out, and perfectly aligned. It is obvious that there is a lot of care for quality and craftsmanship when these frames are made and designed. Thank you Avant for making such a game changing frame for FPV racing/freestyle. I surely will not hesitate to purchase from you again and recommend all of my fellow enthusiasts to purchase from you as well.

    Also, please note that the actual shipping time to the US West Coast was approximately half of the expected/anticipated wait.

    My only gripe, and it is a small one, because anyone building a miniquad should be mechanically inclined, is that there are no installation instructions.

    Thank you for a great experience.

  2. Superior Quality

    Posted by Michael on 11th Nov 2017

    This is my second quad from Avant, this one is just the frame kit. Very nice CNC work on frame pieces and arms. Nice beveled edges on the high quality carbon fiber. All the holes in the lower, mid, upper plates and arms lined up perfectly.
    Avant Quad is making high quality quads and has great customer service,responding and answering all questions in a very timely fashion. If you have questions about options for quads, Eddie will help you out with expert knowledge of all options he has tested on each type of quad they make. When you purchased one of their quads and fly it you will be amazed how fast and agile it handles! Superior quality for a fair price.

  3. Stunning

    Posted by Ross on 7th Oct 2017

    Really beautiful well cut frame with lots of nice touches. I've bought a lot of Avant frames, and this one is truly great.

Add to Wish List

Click the button below to add the DEVEL 5 Frame Kit "NEW" to your wish list.

You Recently Viewed...