This is a complete built model and is designed for 2-3S lipo setup (Not suggested for 4S). Standard PID setting is specifically tuned for 2-3S 450mah/520mah lipo. Each unit is pre-tuned before shipment

 "For canadian customer only: Please contact us for shipping quote before placing the order"

Note: Please submit reviewers' code in the "Message Box" instead of "Coupon Code Window" and a free gift will be offered with the purchase

        Features:

• 1x Kira 2.5 frame kit (Base plate cut in 45deg)
• 1x SI F4 FC / ESC 2-4s 16 x 16mm (4in1 Dshot600) / 25-200mw VTX with IRC Tramp setup
• 4x Avant 1103-7650kv motor (Brotherhobby Rebranded)
• 1x Runcam Nano 2 (2.1mm)
• 1x 3d printed TPU vtx antenna mount
• 2x 3d printed TPU camera mount
• 1x Rubycon 16V 100uF capacitor
• 2x Avant lipo strap
• 1x Non slip lipo pad
• 1x HQ65mm prop (4CCW / 4CW)

        Tips:

• Lipo should be mounted slightly to the front for proper CG
• Insert the prop all the way down to the top of the motor bell 
• Set more camera tilt angle by moving the TPU camera mount upward and downward (Up to 50deg) 
• Insert the props in proper direction as shown in the diagram below
• 2S-3S setup (450-520mah up to 5mins)