This is a complete built model which is suitable for 2-3S lipo setup (Not suggested for 4S). Each unit is custom-tuned with Betaflight Firmware 4.1.1 and the PID settings come standard for 3s setup. AUW with strap, lipo pad and prop weighs 50g. Excellent flight characteristics in windy condition.  This little quad is much quieter and is extremely fast with 3s setup ! 

 "For canadian customer only: Please contact us for shipping quote before placing the order"

Please submit reviewers' code in the "Message Box" instead of "Coupon Code Window" and a free gift will be offered with the purchase

        Features:

• 1x Vanta 2 Nano frame kit (Base plate"3mm thick" cut in 45deg)
• 1x SI F4 FC / ESC 2-4s 16 x 16mm / 25-200mw VTX with IRC Tramp setup (flywoo F411 target)
• 4x Avant 1103-7650kv motor (Brotherhobby Rebranded)
• 1x Runcam Nano 2 (2.1mm)
• 1x 3d printed TPU vtx antenna mount
• 2x 3d printed TPU camera mount
• 1x Rubycon 16V 100uF capacitor
• 2x Avant lipo strap
• 1x Non slip lipo pad
• 1x Gemfan 2023 Tri-Bladed prop (4CCW / 4CW)

        Tips:

• Lipo should be mounted slightly to the front for proper CG
• Insert the prop all the way down to the top of the motor bell 
• Set higher camera tilt angle by moving the TPU camera mount upward and downward (Up to 50deg) 
• Insert the props in proper direction as shown in the diagram below (No prop screw is needed)
• 2S-3S setup (450-650mah up to 5.5mins flight time)
• AC900 Rx comes preset for Frsky protocol (Same binding procedure as XM+)
• Use below PID settings for 2s setup